<b>AVR Devices</b><p> Configurable logic, microcontrollers, nonvolatile memories<p> based on the original libraries: <ul> <li><i>atmel.lbr</i> (created and revised by <author>librarian@cadsoft.de</author> ), based on the following sources: <ul> <li>www.atmel.com <li>CD-ROM : Configurable Logic Microcontroller Nonvolatile Memory <li>CadSoft download site, www.cadsoft.de or www.cadsoftusa.com , file at90smcu_v400.zip <li>avr.lbr </ul> <li><i>Atmel_By_element14_Batch_1-00.lbr</i> </ul><br> These libraries are rearanged by <author>kylie</author> because <ul> <li>elimination of package doubles (same layout, but different names) <li>unification/renaming of symbols, packages <li>renaming of packages to most commonly used names/codes, if possible according to JEDEC <li>elimination of power pins in symbols; power supply symbol (VCC,GND) in devices added <li>in case of multiple power supply pads in devices: update to APPEND-mode </ul> The author do not warrant that this library is free from error or will meet your specific requirements.<p><br> <b>Updates:</b><p> <p> 25.04.2019: <ul> <li>ATmega164/324/644/1284, ATmega165/325/645/3250/6450, ATmega169/329/649/3290/6490 devices revised </ul> 24.03.2019: <ul> <li>ATmega103 device revised <li>ATmega48(P,PV,A,PA)/88(P,PV,A,PA)/168(P,PV,A,PA), ATmega48PB/88PB/168PB/328(P), ATmega328PB devices added </ul> 17.03.2019: <ul> <li>QFP packages revised: land pattern according to Miccrochip AN 8826 <i>Atmel-8826B-SEEPROM-PCB-Mounting-Guidelines-Surface-Mount-Packages-ApplicationNote.pdf</i> <li>ATmega8(L,A), ATmega16(L,A), ATmega32(L,A), ATmega64(L,A), ATmega128(L,A), ATmega48(V)/88(V)/168(V) devices revised </ul> 06.03.2019: <ul> <li>land pattern of packages <ul> <li>QFN20_3X3_0.40, QFN20_3X3_0.45, QFN20_4X4_0.50, QFN20_5X5_0.65, QFN24_4X4_0.50, QFN28_4X4_0.45, QFN32_5X5_0.50, QFN44_7X7_0.50, QFN64_9X9_0.50 <li>DFN8_2x2, DFN8_2x3, DFN10_3X3 <li>BGA 15CC1, 32CC1 </ul>revised (see Miccrochip AN 8826 <i>Atmel-8826B-SEEPROM-PCB-Mounting-Guidelines-Surface-Mount-Packages-ApplicationNote.pdf</i>) </ul><p> 02.2019: <ul> <li>ATtiny devices revised <li>tiny-0-series devices added </ul> 03.2018: <ul> <li>tiny-1-series devices added <li>programming interfaces (UPDI, MISO/MOSI) in various packages added </ul> <p><br> <b>Useful links:</b><p> <p> <a href="https://en.wikipedia.org/wiki/ATtiny_microcontroller_comparison_chart">WIKIPEDIA ATtiny microcontroller comparison chart</a><p> <b>20-Lead Plastic QFN</b>, 3mm x 3mm body, 0.4mm lead pitch, exposed pad<p> Microchip Code: ZCL >NAME >VALUE <B>Small Outline IC</B>, 300mil body width, 50mil lead pitch<p> package/pad dimensions according to IPC-SM-782, RLP No. 306A<p> JEDEC: MS-013 AC<br> IPC: SO20W<p> other notations: SO-20W, SOIC20W, SOIC-20W >NAME >VALUE AVR tiny-1-series Attiny416/816/1616/3216 >VALUE >NAME >NAME GND VCC 8-bit <b>AVR tiny-1-series Microcontroller</b><p> CPU: two-cycle hardware multiplier<br> single pin Unified Program Debug Interface (UPDI)<br> programmable watchdog timer with separate on-chip oscillator<br> programmable brown-out detection circuit with software disable function<br> internal calibrated oscillator<p> <table border="1" cellpadding="3" cellspacing="0"> <tr> <td>Status</td> <td bgcolor="lightgreen">aktiv</td> <td bgcolor="lightgreen">aktiv</td> <td bgcolor="lightgreen">aktiv</td> <td bgcolor="lightgreen">aktiv</td> </tr> <tr bgcolor="#EBEBEB"> <td></td> <td align="center">ATtiny416</td> <td align="center">ATtiny816</td> <td align="center">ATtiny1616</td> <td align="center">ATtiny3216</td> </tr> <tr> <td>General purpose working registers</td> <td colspan="4" align="center">32</td> </tr> <tr> <td>SRAM</td> <td align="right">256 B</td> <td align="right">512 B</td> <td align="right">2 kB</td> <td align="right">2 kB</td> </tr> <tr> <td>Program flash memory</td> <td align="right">4 kB</td> <td align="right">8 kB</td> <td align="right">16 kB</td> <td align="right">32 kB</td> </tr> <tr> <td>EEPROM</td> <td align="right">128B</td> <td align="right">128B</td> <td align="right">256B</td> <td align="right">256B</td> </tr> <tr> <td>16-bit Timer/Counter type A (TCA)</td> <td colspan="4" align="center">1</td> </tr> <tr> <td>16-bit Timer/Counter type B (TCB)</td> <td colspan="2" align="center">1</td> <td colspan="2" align="center">2</td> </tr> <tr> <td>12-bit Timer/Counter type D (TCD)</td> <td colspan="4" align="center">1</td> </tr> <tr> <td>Real Time Counter (RTC)</td> <td colspan="4" align="center">1</td> </tr> <tr> <td>USART</td> <td colspan="4" align="center">1</td> </tr> <tr> <td>SPI</td> <td colspan="4" align="center">1</td> </tr> <tr> <td>TWI (I2C)</td> <td colspan="4" align="center">1</td> </tr> <tr> <td>ADC</td> <td colspan="2" align="center">1</td> <td colspan="2" align="center">2</td> </tr> <tr> <td>ADC channels</td> <td colspan="2" align="center">12</td> <td colspan="2" align="center">12+8</td> </tr> <tr> <td>ADC resolution</td> <td colspan="4" align="center">10 bit</td> </tr> <tr> <td>DAC</td> <td colspan="2" align="center">1</td> <td colspan="2" align="center">3</td> </tr> <tr> <td>AC</td> <td colspan="2" align="center">1</td> <td colspan="2" align="center">3</td> </tr> <tr> <td>Peripheral Touch Controller (PTC)</td> <td align="center">-</td> <td colspan="3" align="center">1</td> </tr> <tr> <td>PTC number of self-capacitance channels</td> <td align="center">-</td> <td align="center">6</td> <td colspan="2" align="center">12</td> </tr> <tr> <td>PTC number of mutual-capacitance channels</td> <td align="center">-</td> <td align="center">9</td> <td colspan="2" align="center">36</td> </tr> <tr> <td>Custom Configurable Logic/Lookup tables</td> <td colspan="4" align="center">1/2</td> </tr> <tr> <td>Window Watchdog</td> <td colspan="4" align="center">1</td> </tr> <tr> <td>Event System channels</td> <td colspan="4" align="center">6</td> </tr> <tr> <td>General purpose I/O</td> <td colspan="4" align="center">18</td> </tr> <tr> <td>External interrupts</td> <td colspan="4" align="center">18</td> </tr> <tr> <td>CRCSCAN</td> <td colspan="4" align="center">1</td> </tr> <tr> <td>Operating voltage</td> <td colspan="4" align="center"><nobr>1.8 ... 5.5 V</nobr></td> </tr> <tr> <td rowspan="3">Speed grade</td> <td colspan="4" align="center"><nobr>0 ... 5 MHz @ 1.8 ... 5.5 V</nobr></td> </tr> <tr> <td colspan="4" align="center"><nobr>0 ... 10 MHz @ 2.7 ... 5.5 V</nobr></td> </tr> <tr> <td colspan="4" align="center"><nobr>0 ... 20 MHz @ 4.5 ... 5.5 V</nobr></td> </tr> <tr> <td rowspan="4">Clock options</td> <td colspan="4" align="center"><nobr>internal 16/20 MHz low power RC oscillator</nobr></td> </tr> <tr> <td colspan="4" align="center"><nobr>internal 32.768 kHz ultra low power RC oscillator</nobr></td> </tr> <tr> <td colspan="4" align="center"><nobr>external 32.768 kHz low-frequency crystal oscillator</nobr></td> </tr> <tr> <td colspan="4" align="center"><nobr>external clock input</nobr></td> </tr> </table> <p> <table border="1" cellpadding="3" cellspacing="0"> <tr bgcolor="#EBEBEB"> <td>Pin Name</td> <td>Other/Special</td> <td>ADC0</td> <td>ADC1</td> <td>PTC</td> <td>AC0</td> <td>AC1</td> <td>AC2</td> <td>DAC0</td> <td>USART0</td> <td>SPI0</td> <td>TWI0</td> <td>TCA0</td> <td>TCBn</td> <td>TCD0</td> <td>CCL</td> </tr> <tr> <td>PA0</td> <td>!RESET, UPDI</td> <td>AIN0</td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> <td>LUT0-IN0</td> </tr> <tr> <td>PA1</td> <td></td> <td>AIN1</td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#D9FFD9"></td> <td></td> <td><font color="gray"><i>TxD</i></font></td> <td>MOSI</td> <td><font color="gray"><i>SDA</i></font></td> <td></td> <td></td> <td></td> <td>LUT0-IN1</td> </tr> <tr> <td>PA2</td> <td>EVOUT0</td> <td>AIN2</td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#D9FFD9"></td> <td></td> <td><font color="gray"><i>RxD</i></font></td> <td>MISO</td> <td><font color="gray"><i>SCL</i></font></td> <td></td> <td></td> <td></td> <td>LUT0-IN2</td> </tr> <tr> <td>PA3</td> <td>EXTCLK</td> <td>AIN3</td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#D9FFD9"></td> <td></td> <td><font color="gray"><i>XCK</i></font></td> <td>SCK</td> <td></td> <td>WO3</td> <td bgcolor="#D9FFD9">TCB1 WO</td> </tr> <tr> <td>PA4</td> <td></td> <td>AIN4</td> <td bgcolor="#D9FFD9">AIN0</td> <td bgcolor="#CCFFFF">X0/Y0</td> <td></td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#D9FFD9"></td> <td></td> <td><font color="gray"><i>XDIR</i></font></td> <td>!SS</td> <td></td> <td>WO4</td> <td></td> <td>WOA</td> <td>LUT0-OUT</td> </tr> <tr> <td>PA5</td> <td bgcolor="#D9FFD9">VREFA</td> <td>AIN5</td> <td bgcolor="#D9FFD9">AIN1</td> <td bgcolor="#CCFFFF">X1/Y1</td> <td>OUT</td> <td bgcolor="#D9FFD9">AINN0</td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td></td> <td></td> <td>WO5</td> <td>TCB0 WO</td> <td>WOB</td> </tr> <tr> <td>PA6</td> <td></td> <td>AIN6</td> <td bgcolor="#D9FFD9">AIN2</td> <td bgcolor="#CCFFFF">X2/Y2</td> <td>AINN0</td> <td bgcolor="#D9FFD9">AINP1</td> <td bgcolor="#D9FFD9">AINP0</td> <td>OUT</td> </tr> <tr> <td>PA7</td> <td></td> <td>AIN7</td> <td bgcolor="#D9FFD9">AIN3</td> <td bgcolor="#CCFFFF">X3/Y3</td> <td>AINP0</td> <td bgcolor="#D9FFD9">AINP0</td> <td bgcolor="#D9FFD9">AINN0</td> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> <td></td> <td>LUT1-OUT</td> </tr> <tr> <td>PB5</td> <td>CLKOUT</td> <td>AIN8</td> <td bgcolor="#D9FFD9"></td> <td></td> <td>AINP1</td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#D9FFD9">AINP2</td> <td></td> <td></td> <td></td> <td></td> <td><font color="gray"><i>WO2</i></font></td> </tr> <tr> <td>PB4</td> <td></td> <td>AIN9</td> <td bgcolor="#D9FFD9"></td> <td></td> <td>AINN1</td> <td bgcolor="#D9FFD9">AINP3</td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td></td> <td></td> <td><font color="gray"><i>WO1</i></font></td> <td></td> <td></td> <td><font color="gray"><i>LUT0-OUT</i></font></td> </tr> <tr> <td>PB3</td> <td>TOSC1</td> <td></td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td bgcolor="#D9FFD9">OUT</td> <td bgcolor="#D9FFD9"></td> <td></td> <td>RxD</td> <td></td> <td></td> <td><font color="gray"><i>WO0</i></font></td> </tr> <tr> <td>PB2</td> <td>TOSC2, EVOUT1</td> <td></td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#D9FFD9">OUT</td> <td></td> <td>TxD</td> <td></td> <td></td> <td>WO2</td> </tr> <tr> <td>PB1</td> <td></td> <td>AIN10</td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#CCFFFF">X4/Y4</td> <td>AINP2</td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#D9FFD9"></td> <td></td> <td>XCK</td> <td></td> <td>SDA</td> <td>WO1</td> </tr> <tr> <td>PB0</td> <td></td> <td>AIN11</td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#CCFFFF">X5/Y5</td> <td></td> <td bgcolor="#D9FFD9">AINP2</td> <td bgcolor="#D9FFD9">AINP1</td> <td></td> <td>XDIR</td> <td></td> <td>SCL</td> <td>WO0</td> </tr> <tr> <td>PC0</td> <td></td> <td></td> <td bgcolor="#D9FFD9">AIN6</td> <td></td> <td></td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td><font color="gray"><i>SCK</i></font></td> <td></td> <td></td> <td><font color="gray"><i>TCB0 WO</i></font></td> <td>WOC</td> </tr> <tr> <td>PC1</td> <td></td> <td></td> <td bgcolor="#D9FFD9">AIN7</td> <td></td> <td></td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td><font color="gray"><i>MISO</i></font></td> <td></td> <td></td> <td></td> <td>WOD</td> <td><font color="gray"><i>LUT1-OUT</i></font></td> </tr> <tr> <td>PC2</td> <td>EVOUT2</td> <td></td> <td bgcolor="#D9FFD9">AIN8</td> <td></td> <td></td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td><font color="gray"><i>MOSI</i></font></td> <td></td> <td></td> </tr> <tr> <td>PC3</td> <td></td> <td></td> <td bgcolor="#D9FFD9">AIN9</td> <td></td> <td></td> <td bgcolor="#D9FFD9"></td> <td bgcolor="#D9FFD9"></td> <td></td> <td></td> <td><font color="gray"><i>!SS</i></font></td> <td></td> <td><font color="gray"><i>WO3</i></font></td> <td></td> <td></td> <td>LUT1-IN0</td> </tr> <tr> <td bgcolor="#CCFFFF"></td> <td colspan="15">only available in devices with 8/16/32KByte flash, X- or Y-line</td> </tr> <tr> <td bgcolor="#D9FFD9"></td> <td colspan="15">only available in device ATtiny1616/ATtiny3216</td> </tr> </table> <b>CAPACITOR</b> >NAME >VALUE >NAME >VALUE <b>CAPACITOR</b> >NAME >VALUE non-polarized capacitor >NAME >VALUE >NAME <b>RESISTOR</b> >NAME >VALUE <b>RESISTOR</b><p> wave soldering >NAME >VALUE >NAME >VALUE LED 1206 pads (standard pattern) >NAME >VALUE LED1206 FAB style (smaller pads to allow trace between) >NAME >VALUE 5mm round through hole part. >NAME >VALUE <b>OMRON SWITCH</b> >NAME >VALUE 1 2 3 4 (Black) (Green) >NAME >VALUE LED >NAME >VALUE >NAME >VALUE <b>Resistor (US Symbol)</b> <p> Variants with postfix FAB are widened to allow the routing of internal traces LED <b>OMRON SWITCH</b> <b>Pin Header Connectors</b><p> <author>Created by librarian@cadsoft.de</author> <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE <b>PIN HEADER</b> >NAME >VALUE PIN HEADER PIN HEADER PIN HEADER PIN HEADER PIN HEADER PIN HEADER PIN HEADER PIN HEADER >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE <b>PIN HEADER</b> <b>PIN HEADER</b> <b>PIN HEADER</b> <b>PIN HEADER</b> Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.